Everyone hates a leaky faucet. Not only does this waste water but the sound that the dripping makes is enough to drive you crazy. If you too have this problem and would like to repair a dripping faucet on your own, take a look at what your Southampton handyman has to tell you. There are 3 possible solutions when it comes to this particular issue.

 

Change the rubber ring to repair a dripping faucet

This is the best-known technique to solve the problem of a dripping tap, suitable for faucets that have already been used for a couple of years.

The old pipes system allowed the water to pass to a valve that opened or closed by turning the tap. In order for the seal to be tighter, the taps had a rubber that expanded with pressure, cutting off the water. As time went on, the hides and gums dried out, leaving tiny gaps for some drops to escape through.

In order to repair a dripping faucet, the technique is simple: cut the water supply, remove the cover caps from the taps with a screwdriver, and carefully remove the whole system to analyze the situation internally.

When removing the little rubber ring that surrounds the stem, check its state. If it’s parched, crushed or broken, replace it with another, either the original from the hardware store or a simple piece of rubber, cut to size. This will solve the problem in seconds.

 

Change the shank

If the faucet still drips when you reinstall the system, the problem probably lies within the piston rod.

Due to excessive use and the passage of time, the metallic system may have suffered damage, disabling the hermetic closure of the system.

It will be enough to replace the rod with a new one, readily available in hardware or specialized store.

Change the system by using suitable materials, reassemble it, and enjoy a faucet that no longer drips or drives you mad.

 

Remove tartar from tap to prevent dripping

Hard waters can leave tartar deposits that affect the cutting system of the taps; even those that are in perfect condition or relatively new.

One solution, in this case, is to disarm the system and let the pieces soak overnight (or for a few hours) in a solution of three parts white vinegar, one part water, and one teaspoon of baking soda. This will eliminate tartar, allowing a complete system closure.

Make sure to practice this once a year to keep your pipes in the best condition. Of course, you can repeat this process for every water-using appliance in your home so that the risk of tartar buildup and damage is minimal.

 

You don’t need to have exceptional skills in order to repair a dripping faucet. However, if you’re not handy at all or don’t possess the necessary tools, feel free to give your local Southampton handyman and ifixt a call. We can deal with this particular issue in no time, efficiently and professionally.

Share This