Cracks, pricks, and holes in the walls can appear due to wear, tear, accidents and plenty of other potential reasons. And that’s OK, as you can’t really avoid something like this forever. But, it’s up to your Morrisville handyman to let you in on the best techniques that will help you cover holes in the walls on your own if that’s something you’d want.


What you should know before covering holes in the wall

The most logical thing after having an electrical or plumbing intervention is that your walls are probably left a total mess; chipped, scratched and, of course, affected with holes. These holes can be big or small: sometimes even as small as a nail can leave. In the case of larger holes, the techniques for covering them will be a bit more complex as well.

Regardless of whether it’s a small or a hole the size of a tennis ball, the point is to get the necessary material before you start so that you can achieve good results when you cover holes in the walls.


What do you need to cover holes in the wall?

Most importantly, you need enough putty and a spatula. These two essentials will solve almost all the issues that require some wall hole fixing.

Specialized stores carry several different types of putty. The important thing is to make sure that the putty you buy doesn’t decrease in volume after drying. This decrease in volume would cause a gap between the wall and the putty, which would ruin all the work you did before.

If it’s a small hole or just a crack, you can use sealing paint. So, use this type of paint to fill in the cavity and extend the product over the damaged area.


What technique to apply?

Small holes

As mentioned, one of the things that will determine the technique are the dimensions of the holes. If the hole is small, put a small amount of putty on the spatula. Next, proceed with the flattening. You have to make sure there is no difference between the wall and the putty. Basically, the hole should be completely filled.

Then clean the excess and the stain around the hole. This is the time to check if the surface has been properly flattened. If not, do not worry, you can reapply more putty where needed. Now, it’s convenient to let it dry and analyze whether more layers will be necessary.


Large holes

In case the hole you have to fix is bigger in size, apart from putty and spatula, you’ll have to use some material to patch the hole before applying the product. There are specific patches for this purpose: the good thing is that they will hold better than using tape and then, practically, you won’t have to smooth them out too much.

Another technique involves using adhesive tape or even a plug that is adjustable to the hole to be covered. Then also proceed to smooth out or fill with putty.

When you’re facing a larger hole, it’s effective to sand the area to remove debris and even out the surface. With so much putty, it’s preferable to wait at least a whole day before sanding, so that it dries properly.


As you can see, it’s not all that difficult to successfully cover holes in the walls. But, if you’re not accustomed to this kind of work, don’t hesitate to rely on ifixit and give your local Morrisville handyman a call. We will make sure that the job is done quickly and seamlessly.

Share This