Think it’s time to replace your old faucet with a new one? A new faucet can help you solve several possible issues, such as poor or uncontrollable water flow as well as water pressure. Of course, a fuss-free water source is essential for your overall comfort and cozy lifestyle. If you believe that faucet installation is something that you can efficiently take care of on your own, take a look at the following tips. These can help you finish the task easily. Still, if you encounter some problems during the process, it may be better and safer to call for your Southampton handyman.
1. Turn the water off
The first thing you should do is to turn off your water supply. If you’re dealing with a faucet installation in your bathroom, the stopcock should be located under the sink. In case you want to replace the faucet in the kitchen, look for a stopcock under the dishwasher. Make sure to clean out the pipes that connect the stopcock and faucet of the remaining water and possible debris. Also, remove any furniture located in this area. In case you cannot find your stopcock or have a different kind of valve, this should be the first sign to call for your local Southampton handyman.
2. Remove the old faucet
When you cut off the water supply, disconnect the hoses for hot and cold water. Before you do this, make sure to place some kind of a container underneath so that you don’t get water all over your floor. Then you can proceed and unscrew the nuts holding the faucet. Remove the rubber ring and gasket afterwards. Once every part is removed and the faucet is no longer connected, simply lift it up from its base.
3. Seal any possible holes
If you’re set on changing the type of your new faucet, there is a possibility that your sink or dishwasher will be left with unsightly holes. The easiest way to achieve successful faucet installation is to stick to the original type of the faucet. If you think you can manage the replacement yourself, make sure to seal the holes with rubber, silicone or stainless steel cups. The material that you should use depends on the material of your sink/dishwasher.
4. Install the new faucet
Usually, faucets come with the already connected hoses for hot and cold water. All you need to do is attach them properly. There is also one extra hole for the fastening bolt. Before you screw the hoses, make sure that you place a gasket on each one and secure them with a tape to prevent any water spillage. Now you can screw the hoses to the tap and tighten the bolt with a screwdriver. Of course, you need to get everything through the faucet hole. You will probably need some assistance in connecting the hose, placing rubber and locking the nut under the sink/dishwasher simply because someone will need to hold the faucet for you during this process.
5. Finish your faucet installation
Make sure to test out the new faucet once you turn the water on. However, it would be best to remove the aerator before you start using your new faucet. This can save you a lot of trouble since plumbing work can cause a build-up in your pipes. Let the water run for a while with aerator removed. Then screw it back onto the faucet. This can turn out to be the best solution for any future problems regarding water flow as well.
If you feel like the process of DIY faucet installation is too complicated and bothersome for you alone, feel free to contact ifixit and ask for your pro Southampton handyman. Appliance installation is a part of our business niche, together with all other home repairs that you could need. In that respect, ifixit can help you improve your overall lifestyle while keeping it sustainable at the same time.